11
装饰装修施工质量标准
2
2
前 言
前言
2
本标准是依据现行建筑工程质量验收规范、工艺标准、做法图集，结合公司《产品制造1.0工艺标准
》、《深化设计指导手册》及《竣工达标验评》要求编制而成。
本标准主要目的为提升竣工交付产品品质，降低竣工后使用功能缺陷，杜绝交付产品渗、裂、鼓以及
脱落等风险。
本标准包含7章，主要内容涉及屋面、装饰装修、水暖、电气、通风与空调5个分部工程。
本标准适用于公司全区域范围内在施项目，是决定能否交付使用的重要依据，自标准发布实施，该标
准作为装饰阶段日常质量管理检查重点，项目应认真参照执行。
本标准为企业性标准，在执行中如发现与建设单位或地方标准不同，尚应参考建设单位或地方性标准
执行。
为持续提升装饰质量标准的全面性、先进性，在执行过程中，项目部应总结成熟经验，积累资料，将
有关改进意见或建议发至公司质量部。（地址：通州区云杉路2号院32号楼，电话：010-56081010转8020）
技术发展中心质量部
二〇一九年八月
装饰装修质量标准
3
3
目 录
目录
3
装饰装修质量标准
1 屋面工程
1.1 屋面深化设计··················································· 6
1.2 屋面广场砖全整砖施工工艺·························· 7
1.3 屋面结构防水分区工法··································· 8
1.4 屋面面层分格缝施工工艺······························· 9
1.5 屋面细石混凝土面层施工工艺 ······················ 10
1.6 女儿墙防水凹槽收头······································· 11
1.7 女儿墙压顶施工工艺······································· 12
1.8 圆弧形泛水施工工艺······································· 13
1.9 屋面排水天沟施工工艺··································· 14
1.10 成品水簸箕····················································· 15
1.11 屋面透气管道管根收口································· 16
1.12 屋面爬梯安装················································· 17
1.13 屋面排气管暗装工法····································· 18
1.14 屋面烟风帽做法············································· 19
1.15 屋面结构现浇变形缝工艺····························· 20
1.16 屋面淋蓄水试验············································· 21
2 室内装饰装修分项
2.1 楼地面面层精确
中天装饰装修施工质量标准手册（71页）
